<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1230 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
12310 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
12311 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
12312 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
12313 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
12314 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1231 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1232 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1233 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1234 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1235 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1236 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1237 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1238 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>
<header>
<MG5ProcCard>
#************************************************************
#* MadGraph5_aMC@NLO *
#* *
#* * * *
#* * * * * *
#* * * * * 5 * * * * *
#* * * * * *
#* * * *
#* *
#* *
#* VERSION 2.3.0 2015-07-01 *
#* *
#* The MadGraph5_aMC@NLO Development Team - Find us at *
#* https://server06.fynu.ucl.ac.be/projects/madgraph *
#* *
#************************************************************
#* *
#* Command File for MadGraph5_aMC@NLO *
#* *
#* run as ./bin/mg5_aMC filename *
#* *
#************************************************************
set group_subprocesses Auto
set ignore_six_quark_processes False
set loop_color_flows False
set gauge unitary
set complex_mass_scheme False
set max_npoint_for_channel 0
import model sm
define p = g u c d s u~ c~ d~ s~
define j = g u c d s u~ c~ d~ s~
define l+ = e+ mu+
define l- = e- mu-
define vl = ve vm vt
define vl~ = ve~ vm~ vt~
import model loop_sm_MSbar_yb-no_yt
generate p p > h b b~ [QCD]
output bbH4FS2_yb2
</MG5ProcCard>
<slha>
######################################################################
## PARAM_CARD AUTOMATICALY GENERATED BY MG5 FOLLOWING UFO MODEL ####
######################################################################
## ##
## Width set on Auto will be computed following the information ##
## present in the decay.py files of the model. ##
## See arXiv:1402.1178 for more details. ##
## ##
######################################################################
###################################
## INFORMATION FOR LOOP
###################################
Block loop
1 9.118800e+01 # MU_R
###################################
## INFORMATION FOR MASS
###################################
Block mass
5 4.750000e+00 # MB
6 1.730000e+02 # MT
15 1.777000e+00 # MTA
23 9.118800e+01 # MZ
25 1.250000e+02 # MH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
1 0.000000 # d : 0.0
2 0.000000 # u : 0.0
3 0.000000 # s : 0.0
4 0.000000 # c : 0.0
11 0.000000 # e- : 0.0
12 0.000000 # ve : 0.0
13 0.000000 # mu- : 0.0
14 0.000000 # vm : 0.0
16 0.000000 # vt : 0.0
21 0.000000 # g : 0.0
22 0.000000 # a : 0.0
24 80.419002 # w+ : cmath.sqrt(MZ__exp__2/2. + cmath.sqrt(MZ__exp__4/4
###################################
## INFORMATION FOR SMINPUTS
###################################
Block sminputs
1 1.325070e+02 # aEWM1
2 1.166390e-05 # Gf
3 1.180000e-01 # aS
###################################
## INFORMATION FOR YUKAWA
###################################
Block yukawa
5 4.187000e+00 # ymb: mb(mb)
15 1.777000e+00 # ymtau
###################################
## INFORMATION FOR DECAY
###################################
DECAY 6 1.491500e+00 # WT
DECAY 23 2.441404e+00 # WZ
DECAY 24 2.047600e+00 # WW
DECAY 25 6.382339e-03 # WH
## Dependent parameters, given by model restrictions.
## Those values should be edited following the
## analytical expression. MG5 ignores those values
## but they are important for interfacing the output of MG5
## to external program such as Pythia.
DECAY 1 0.000000 # d : 0.0
DECAY 2 0.000000 # u : 0.0
DECAY 3 0.000000 # s : 0.0
DECAY 4 0.000000 # c : 0.0
DECAY 5 0.000000 # b : 0.0
DECAY 11 0.000000 # e- : 0.0
DECAY 12 0.000000 # ve : 0.0
DECAY 13 0.000000 # mu- : 0.0
DECAY 14 0.000000 # vm : 0.0
DECAY 15 0.000000 # ta- : 0.0
DECAY 16 0.000000 # vt : 0.0
DECAY 21 0.000000 # g : 0.0
DECAY 22 0.000000 # a : 0.0
</slha>
<MGRunCard>
#***********************************************************************
# MadGraph5_aMC@NLO *
# *
# run_card.dat aMC@NLO *
# *
# This file is used to set the parameters of the run. *
# *
# Some notation/conventions: *
# *
# Lines starting with a hash (#) are info or comments *
# *
# mind the format: value = variable ! comment *
#***********************************************************************
#
#*******************
# Running parameters
#*******************
#
#***********************************************************************
# Tag name for the run (one word) *
#***********************************************************************
tag_1 = run_tag ! name of the run
#***********************************************************************
# Number of LHE events (and their normalization) and the required *
# (relative) accuracy on the Xsec. *
# These values are ignored for fixed order runs *
#***********************************************************************
50000 = nevents
-1.0 = req_acc ! Required accuracy (-1=auto determined from nevents)
-1 = nevt_job! Max number of events per job in event generation.
! (-1= no split).
#***********************************************************************
# Normalize the weights of LHE events such that they sum or average to *
# the total cross section *
#***********************************************************************
average = event_norm ! average or sum
#***********************************************************************
# Number of points per itegration channel (ignored for aMC@NLO runs) *
#***********************************************************************
0.01 = req_acc_FO ! Required accuracy (-1=ignored, and use the
! number of points and iter. below)
# These numbers are ignored except if req_acc_FO is equal to -1
5000 = npoints_FO_grid ! number of points to setup grids
4 = niters_FO_grid ! number of iter. to setup grids
10000 = npoints_FO ! number of points to compute Xsec
6 = niters_FO ! number of iter. to compute Xsec
#***********************************************************************
# Random number seed *
#***********************************************************************
1239 = iseed
#***********************************************************************
# Collider type and energy *
#***********************************************************************
1 = lpp1 ! beam 1 type (0 = no PDF)
1 = lpp2 ! beam 2 type (0 = no PDF)
6500 = ebeam1 ! beam 1 energy in GeV
6500 = ebeam2 ! beam 2 energy in GeV
#***********************************************************************
# PDF choice: this automatically fixes also alpha_s(MZ) and its evol. *
#***********************************************************************
lhapdf = pdlabel ! PDF set
292000 = lhaid ! if pdlabel=lhapdf, this is the lhapdf number
#***********************************************************************
# Include the NLO Monte Carlo subtr. terms for the following parton *
# shower (HERWIG6 | HERWIGPP | PYTHIA6Q | PYTHIA6PT | PYTHIA8) *
# WARNING: PYTHIA6PT works only for processes without FSR!!!! *
#***********************************************************************
PYTHIA8 = parton_shower
#***********************************************************************
# Renormalization and factorization scales *
# (Default functional form for the non-fixed scales is the sum of *
# the transverse masses of all final state particles and partons. This *
# can be changed in SubProcesses/set_scales.f) *
#***********************************************************************
False = fixed_ren_scale ! if .true. use fixed ren scale
False = fixed_fac_scale ! if .true. use fixed fac scale
33.625 = muR_ref_fixed ! fixed ren reference scale
33.625 = muF1_ref_fixed ! fixed fact reference scale for pdf1
33.625 = muF2_ref_fixed ! fixed fact reference scale for pdf2
-1 = dynamical_scale_choice ! Select one of the preselect dynamical cho
#***********************************************************************
# Renormalization and factorization scales (advanced and NLO options) *
#***********************************************************************
False = fixed_QES_scale ! if .true. use fixed Ellis-Sexton scale
33.625 = QES_ref_fixed ! fixed Ellis-Sexton reference scale
1.0 = muR_over_ref ! ratio of current muR over reference muR
1.0 = muF1_over_ref ! ratio of current muF1 over reference muF1
1.0 = muF2_over_ref ! ratio of current muF2 over reference muF2
1.0 = QES_over_ref ! ratio of current QES over reference QES
#***********************************************************************
# Reweight flags to get scale dependence and PDF uncertainty *
# For scale dependence: factor rw_scale_up/down around central scale *
# For PDF uncertainty: use LHAPDF with supported set *
#***********************************************************************
True = reweight_scale ! reweight to get scale dependence
0.5 = rw_Rscale_down ! lower bound for ren scale variations
2.0 = rw_Rscale_up ! upper bound for ren scale variations
0.5 = rw_Fscale_down ! lower bound for fact scale variations
2.0 = rw_Fscale_up ! upper bound for fact scale variations
False = reweight_PDF ! reweight to get PDF uncertainty
244601 = PDF_set_min ! First of the error PDF sets
244700 = PDF_set_max ! Last of the error PDF sets
#***********************************************************************
# ickkw parameter: *
# 0: No merging *
# 3: FxFx Merging - WARNING! Applies merging only at the hard-event *
# level. After showering an MLM-type merging should be applied as *
# well. See http://amcatnlo.cern.ch/FxFx_merging.htm for details. *
# 4: UNLOPS merging (with pythia8 only). No interface from within *
# MG5_aMC available, but available in Pythia8. *
# -1: NNLL+NLO jet-veto computation. See arxiv:1412.8408 [hep-ph]. *
#***********************************************************************
0 = ickkw
#***********************************************************************
#
#***********************************************************************
# BW cutoff (M+/-bwcutoff*Gamma) *
#***********************************************************************
15.0 = bwcutoff
#***********************************************************************
# Cuts on the jets *
# Jet clustering is performed by FastJet.
# When matching to a parton shower, these generation cuts should be *
# considerably softer than the analysis cuts. *
# (more specific cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
1.0 = jetalgo ! FastJet jet algorithm (1=kT, 0=C/A, -1=anti-kT)
0.7 = jetradius ! The radius parameter for the jet algorithm
10.0 = ptj ! Min jet transverse momentum
-1.0 = etaj ! Max jet abs(pseudo-rap) (a value .lt.0 means no cut
#***********************************************************************
# Cuts on the charged leptons (e+, e-, mu+, mu-, tau+ and tau-) *
# (more specific gen cuts can be specified in SubProcesses/cuts.f) *
#***********************************************************************
0.0 = ptl ! Min lepton transverse momentum
-1.0 = etal ! Max lepton abs(pseudo-rap) (a value .lt.0 means no c
0.0 = drll ! Min distance between opposite sign lepton pairs
0.0 = drll_sf ! Min distance between opp. sign same-flavor lepton pai
0.0 = mll ! Min inv. mass of all opposite sign lepton pairs
30.0 = mll_sf ! Min inv. mass of all opp. sign same-flavor lepton pa
#***********************************************************************
# Photon-isolation cuts, according to hep-ph/9801442 *
# When ptgmin=0, all the other parameters are ignored *
#***********************************************************************
20.0 = ptgmin ! Min photon transverse momentum
-1.0 = etagamma ! Max photon abs(pseudo-rap)
0.4 = R0gamma ! Radius of isolation code
1.0 = xn ! n parameter of eq.(3.4) in hep-ph/9801442
1.0 = epsgamma ! epsilon_gamma parameter of eq.(3.4) in hep-ph/98014
True = isoEM ! isolate photons from EM energy (photons and leptons)
#***********************************************************************
# Maximal PDG code for quark to be considered a jet when applying cuts.*
# At least all massless quarks of the model should be included here. *
#***********************************************************************
4 = maxjetflavor
#***********************************************************************
# For aMCfast+APPLGRID use in PDF fitting (http://amcfast.hepforge.org)*
#***********************************************************************
0 = iappl ! aMCfast switch (0=OFF, 1=prepare APPLgrids, 2=fill grids)
#***********************************************************************
</MGRunCard>
<scalesfunctionalform>
muR H_T/4 := sum_i mT(i)/4, i=final state
muF1 H_T/4 := sum_i mT(i)/4, i=final state
muF2 H_T/4 := sum_i mT(i)/4, i=final state
QES H_T/4 := sum_i mT(i)/4, i=final state
</scalesfunctionalform>
<MonteCarloMasses>
1 0.330000E+00
2 0.330000E+00
3 0.500000E+00
4 0.150000E+01
5 0.480000E+01
11 0.510999E-03
13 0.105658E+00
15 0.177682E+01
21 0.000000E+00
</MonteCarloMasses>
<initrwgt>
<weightgroup type='scale_variation' combine='envelope'>
<weight id='1001'> muR=0.10000E+01 muF=0.10000E+01 </weight>
<weight id='1002'> muR=0.10000E+01 muF=0.20000E+01 </weight>
<weight id='1003'> muR=0.10000E+01 muF=0.50000E+00 </weight>
<weight id='1004'> muR=0.20000E+01 muF=0.10000E+01 </weight>
<weight id='1005'> muR=0.20000E+01 muF=0.20000E+01 </weight>
<weight id='1006'> muR=0.20000E+01 muF=0.50000E+00 </weight>
<weight id='1007'> muR=0.50000E+00 muF=0.10000E+01 </weight>
<weight id='1008'> muR=0.50000E+00 muF=0.20000E+01 </weight>
<weight id='1009'> muR=0.50000E+00 muF=0.50000E+00 </weight>
</weightgroup>
</initrwgt>
</header>